Process Equipment and Plant Design
Pick out the wrong statement about routing of fluids in a shell and tube heat exchanger
The corrosive and fouling fluid should be preferably routed through the tubes.
The viscous fluid should be routed through the shell side.
Lower flow rate fluid should be routed through the shell side.
Higher pressure fluid stream should be routed through the shell side.
A Foxoyo User
Phosphoric acid is produced in wet process from phosphate rock and
The fugacity of liquid water at 298 K is approximately 3171 Pa. Considering the ideal heat of vaporisation as 43723 J/gm mole, its fugacity at 300 K would be
Sodium tri poly phosphate (STPP) is manufactured by reaction of phosphoric acid with sodium