Hey..!!

- Level 0
- 0 %

Accuracy -

share

The chuck preferred for quick setting and accurate centering of a job is

A shopkeeper has a job to print certain number of documents and there are three machines P, Q and R for this job. P can complete the job in 3 days, Q can complete the job in 4 days and R can complete

Consider the following statements regarding Plane Table surveying : 1. It is less accurate than chain surveying. 2. It is not necessary to do accurate centering of plane table for small scale survey.3

Statements:All carpenters are agile people.Some agile people are quick.No soft is quick.Conclusions:I. Some carpenters are soft.II. Some carpenters are quick.III. Some agile are not soft

The chuck used for setting up of heavy and irregular shaped work should be

A can do a job in 16 days, and B can do the same job in 12 days. With the help of C, they did the job in 4 days. Then, C alone can do the job in

A mother can do a certain job in x hours. Her daughter takes twice as long to do the job. Working together, they can do the job in 6 hours. How many hours does the mother take to do the job

A can do a job in 16 days, B can do same job in 12 days. With the help of C they did the job in 4 days. C alone can do the same job in how many days

While setting a plane table at a station it was found that the error in centering was 30 cm away from the ray of length 40 m drawn from the station. If the scale of the plan is 1 cm = 2 cm, the displa

Two workers A and B manufactured a batch of identical parts. A worked for 2 hours and B worked for 5 hours and they completed half the job. Then they worked together for another 3 hours and they had t