Hey..!!

An estimate (using Bond's law) of the energy to grind the particles from a very large size to 50 μrn is

A Foxoyo User

- Level 0
- 0 %

Accuracy -

share

The energy required per unit mass to grind limestone particles of very large size to 100 μm is 12.7 kWh/ton. An estimate (using Bond's law) of the energy to grind the particles from a very large size

100 ton/h of a rock feed, of which 80% passed through a mesh size of 2.54 mm, were reduced in size such that 80% of the crushed product passed through a mesh size of 1.27 mm. The power consumption was

2 ton of cement is used to make 10 ton of hardened concrete having a water cement ratio of 0.45. One cubic meter of this concrete has a mass of 2.5 ton. The area of 200 mm thick slab (in sq. m) that

2 ton of cement is used to make 10 ton of hardened concrete having a water cement ratio of 0.45. One cubic meter of this concrete has a mass of 2.5 ton. Quantity of water used (in kg) is

The electric energy required to raise the temperature of a given amount of water is 1000 kWh. If heat losses are 25%, the total heating energy required is __________ kWh

During testing of an energy meter, the energy recorded by meter was 0.05 kWh and correct energy was found to be 0.09 kWh. The error and correction respectively are

A consumer consume. 600 kWh per day at a load factor of 0.40. If the coneumer increases the load factor of 0.70 without increasing the maximum demand, what is the consumption of energy in kWh

Work index is the gross energy (kWh/tonne of feed) necessary to reduce a very large feed to such a size that 80% of product particles will pass through a 0.1 mm screen. The value of work index determi

Limestone decomposes to form calcium oxide and carbon dioxide. What is the mass of limestone required to produced 84.0 kg of calcium oxide

For a power system network with n nodes, Z33 of its bus impedance matrix is j0.5 per unit. The voltage at node 3 is 1.3 ∠-10o per unit. If a capacitor having reactance of –j3.5 per unit is now add