Messages from one computer terminal can be sent to another by using data networks. The message to be sent is converted to an electronic digital signal, transmitted via a cable, telephone or satellite
Consider the following statements : Tellegen's theorem is applicable to any lumped networks.The reciprocity theorem is applicable to linear bilateral networks.Thevenin's theorem is applicable to two-
Consider the following statements for 8085 The most significant 8 bits of address are transmitted on the 8 lines on which data is transmitted.Eight pins are dedicated to transmit the most significant
You have been given the task of installing cables for an Ethernet network in your office. The building is an older one, and-you have limited work space. In addition, the network cable will have to sha
A group of 2n - 1 routers are interconnected in a centralised binary tree, with a router at each tree node. Router i communicates with router j by sending a message to the root of the tree. The root t
After coding a document into a digital signal, it can be sent by telephone, telex or satellite to the receiver where the signal is decoded and an exact copy of the original document is made. What is i
You have the following routing table. Which of the following networks will not be placed in the neighbor routing table R 192.168.30.0/24 [120/1] via 192.168.40.1, 00:00:12, Serial0 C 192.168.40.0/24 i
You have the following routingtable.
Which of the following networks will not be placed in the neighbor routing table
30.0/24 [120/1] via192.
40.1, 00:00:12, Serial0
40.0/24 is directly connected, Serial0
16.0.0/24 is subnetted, 1 subnets
16.30.0 is directly connected, Loopback0
20.0/24 [120/1] via192.
40.1, 00:00:12, Serial0
R 10.0.0.0/8 [120/15] via192.
40.1, 00:00:07, Serial0
50.0/24 is directly connected, Ethernet0
A group of 2m - 1 routers are interconnected in a centralized binary tree, with router at each tree node. Router I communicate with router J by sending a message to the root of the tree. The root then
If ListBox is class present in System.Windows.Forms namespace, then which of the following statements are the correct way to create an object of ListBox Class using System.Windows.Forms; ListBox lb =
Consider the following statements In a pulsed radar, the transmitted pulses are of high frequencyIn a pulsed radar, the transmitted pulses are of high powerIn a pulsed radar, the transmitted pulses ar