• Level 0
  • 0
  • 93
  • 0 %

  • share

Guaranteed answer

Just add "foxoyo"

next time you Google a mcq Questions

I want answer on Click

Related MCQs

For harder alloy steel, the point angle of the drill is kept
In a single pass drilling operation, a through hole of 15 mm diameter is to be drilled in a steel plate of 50 mm thickness. Drill spindle speed is 500 rpm, feed is 0.2 mm/rev and drill point angle is
A drill bit of 20 mm diameter rotating at 500 r.p.m. with a feed rate of 0.2 mm/revolution is used to drill a through-hole in a mild steel plate 20 mm thickness. The depth of cut in this drilling oper
Point P is 10m to the West of Point A. Point B is 2m to the South of Point P. Point Q is 6m to the East of Point B. Point C is 2m to the North of Point Q. Which of the following three points fall in a
For softer materials, the point angle of the drill is kept
An alloy is prepared by mixing equal volume of two metals. The specific gravity of alloy is 4. But when equal masses of two same metals are mixed together, the specific gravity of alloy is 3. The spec
Alloy A contains 40% gold and 60% silver. Alloy B contains 35% gold and 40% silver and 25% copper. Alloys A and B  are mixed in the ratio of 1:4 .What is the ratio of gold and silver in the newly for
A ladder leans against wall at point B (window end) from a ground level and makes an angle horizontally at 52°. height of ladder is 15 m. When same ladder leans above point B at point A (window start

No Public Explanation

Click option to see answer

Post your public answer

Every MCQ Answered

1. Add foxoyo.com with question

2. Click option and get answer

Suggested Books