Hey..!!

- Level 0
- 0 %

Accuracy -

share

Pick up the incorrect statement from to following regarding triangular notch

The discharge over a rectangular notch is (where b = Width of notch, and H = Height of liquid, above the sill of the notch)

In an experimental setup, the discharge through a triangular notch is 0.0074 m3 s-1 at an operating head of 0.1 m. The coefficient of discharge for the notch is 0.7. If the required discharge is 0.1 m

In an experimental setup, the discharge through a triangular notch is 0.0074 m3 s-1 at an operating head of 0.1 m. The coefficient of discharge for the notch is 0.7. If the required discharge is 0.1 m

The notch angle for maximum discharge over a triangular notch, is

An error of 1% in measuring head over the apex of the notch (H) will produce an error of __________ in discharge over a triangular notch

A triangular notch is preferred to a rectangular notch because

An error of 1% in measuring head over the crest of the notch (H) will produce an error of __________ in discharge over a triangular notch,

The percentage error in the computed discharge over a triangular notch corresponding to an error of 1% in the measurement of the head over the notch, would be

Pick up the incorrect statement regarding a master trap from the following