Hey..!!

- Level 0
- 0 %

Accuracy -

share

Contour lines are key to explaining size and shape of landforms on a

Which of the following characteristic features may be used while plotting a contour plan ?1. Two contour lines having the same elevation cannot unite the continue as one line.2. Contour lines closed t

The ratio Nf/Nd is known as shape factor, where Nf is the number of flow lines and Nd is the number of equipotential drops. Flow net is always drawn with a constant b/a ratio, where b and a are distan

A map with a contour interval of 20ft would have contour lines every

In a k-way set associative cache, the cache is divided into v sets, each of which consists of k lines. The lines of a set are placed in sequence one after another. The lines in set s are sequenced bef

100 ton/h of a rock feed, of which 80% passed through a mesh size of 2.54 mm, were reduced in size such that 80% of the crushed product passed through a mesh size of 1.27 mm. The power consumption was

The scale of a contour map is 1:10,000 and the contour interval is 5 m. Distance between two given points on the map is 2 cm and the elevation difference between the two given points is 10 m.The slope

The scale of a contour map is 1:10,000 and the contour interval is 5 m. Distance between two given points on the map is 2 cm and the elevation difference between the two given points is 10 m The actua

In a Plane there are 37 straight lines, of which 13 pass through the point A and 11 pass through the point B. Besides, no three lines pass through one point, no lines passes through both points A and

Assertion (A): The line integral of B about a closed contour, in a region containing steady current, is μ0 times the total net current, following through the contour of integration.Reason (R): The cu