• Level 0
  • 0
    Attempts
  • 93
    users
  • 0 %
    Accuracy

  • share

Guaranteed answer

Just add "foxoyo"

next time you Google a mcq Questions

I want answer on Click

Related MCQs

Tool which is used to make indirect measurements of height and distance is called
Two cutting tools are being compared for a machining operation. The tool life equations are: Carbide tool: VT1.6 = 3000HSS tool: VT0.6 = 200where V is the cutting speed in m/min and T is the tool li
Two cutting tools are being compared for a machining operation. The tool life equations are: Carbide tool: VT1.6 = 3000 HSS tool: VT0.6 = 200 where V is the cutting speed in m/min and T is the tool
If the angular measurements of a traverse are more precise than its linear measurements, balancing of the traverse, is done by
A file system with 300 GByte disk uses a file descriptor with 8 direct block addresses, 1 indirect block address and 1 doubly indirect block address. The size of each disk block is 128 Bytes and the s
In the following question, a sentence has been given in Direct/Indirect speech. Out of the four alternatives suggested, select the one which best expresses the same sentence in Indirect/Direct speech.
Assertion (A): In register indirect addressing mode of 8085, the address of operand is in the specified register.Reason (R): An example of register indirect addressing mode is MOV, A, M
The average height of 50 pupils in a class is 150 cm. Five of them whose height is 146 cm, leave the class and five others whose average height is 156 cm, join. The new average height of the pupils of
In an aerial photo, the image of the top of a tower is found to be 10 cm from the centre of thephotograph. If the height of the tower is 100 m and the flying height of the aircraft is 1000 m above the

No Public Explanation

Click option to see answer

Post your public answer

Every MCQ Answered

1. Add foxoyo.com with question

2. Click option and get answer

Suggested Books