Hey..!!

- Level 0
- 0 %

Accuracy -

share

In orthogonal turning of a bar of 100 mm diameter with a feed of 0.25 mm/rev, depth of cut of 4 mm and cutting velocity of 90 m/min, it is observed that the main (tangential) cutting force is perpendi

In orthogonal turning of a bar of 100 mm diameter with a feed of 0.25 mm/rev, depth of cut of 4 mm and cutting velocity of 90 m/min, it is observed that the main (tangential) cutting force is perpendi

Two forces act an angle of 120°. If the greater force is 50 kg and their resultant is perpendicular to the smaller force, the smaller force is

Read the following statements about files in Pascal A file is a data structure which consists of a sequence of components of the same type.The number of components in a file is variable.The components

Number of perpendicular components of force are

Number of perpendicular components of a force are

Group-I contains dimensionless parameters and Group- II contains the ratios.Group-I Group -IIP. Mach Number 1. Ratio of inertial force and gravitational forceQ. Rey

Series components in a series–parallel circuit may be in series with other _______________ components, or with other _______________ components

Splitting up of a force into two mutually perpendicular components is called the

When plane of coil is perpendicular to lines of magnetic force, number of lines of magnetic force passing through coil will be