Foxoyo
Hey..!!
Electronics
Practice
MCQs
Quizzes
About
Leaderboard
Amazon Books
736
MCQs
1
Attempts
100 %
Accuracy
share
Filter by
Type here
Apply
What will happen when an inductor's magnetic field collapses
Counter emf will be high.
A new field will expand.
Current will double.
Voltage will be induced.
What is the frequency of this 555 astable multivibrator
78 Hz
8 Hz
178 Hz
278 Hz
What is the reactive power
6.8 mW
12.8 mW
15.8 mW
9.8 mW
The total circuit power in the given circuit equals _____
64 µW
4 µW
16 × 10–12 W
0 W
When an input signal reduces the channel size, the process is called
Enhancement
gate charge
substrate connecting
depletion
As a generator armature passes the 270 degree point, the induced voltage is
between maximum negative and zero
at maximum positive
between zero and maximum positive
at maximum negative
At any resonant frequency, what net voltage is measured across the two series reactive components
zero voltage
VL + VC voltage
applied voltage
Reactive voltage
What is the voltage across the capacitor
111 mV
1.11 V
7.07 mV
7.07 V
What is the number of turns required in the secondary winding for a transformer when 120 volts is applied to a 2400-turn primary to produce 7.5 Vac at the secondary
900 turns
150 turns
1920 turns
75 turns
If a 1 k and a 2 k resistor are parallel-connected across a 12 V supply, how much current is received by the 2 k resistor
6 mA
4 mA
8 mA
12 mA
If a calculator display was "0.00263," what would this answer be in percent
0.026%
26.3%
0.26%
2.63%
Which statement best describes reactance in a series RLC circuit
The larger of the two reactances is dominant.
Resistance is always dominant.
Capacitive reactance is always dominant.
Inductive reactance is always dominant.
At resonance, the term bandwidth includes all frequencies that allow what percentage of maximum current to flow
95.3
62.3
50
70.7
Which coil would be used as a step-up transformer primary if coil number 1 has 100 more turns than coil number 2
coil 1
The coil windings must be the same.
The coil ratio is too small.
coil 2
The unit designator for resistance value is the
volt
ohm
watt
Ampere
The four factors determining inductance are the number of turns, coil length, coil area, and
reluctance
counter emf
Permeability
Coefficient of coupling
Material that consists of a mixture of elements is considered to be
an ion
a compound
a molecule
an element
What is the average voltage when a rectangular wave's base line voltage is 20 V, its peak-to-peak voltage is 50 V, and its duty cycle is 20%
45 V
30 V
40 V
26 V
In the given circuit, Channel 1 of the stereo amplifier outputs 12 V to thespeakers.
How much total current is the amplifier providing to the speakers
1.5 a
3 A
0 A
More information is needed to find the total current provided to the speakers.
Power is measured in units of
joules x voltage
joules/work
joules/time
joules x charge
1
2
19
37
Next
take a quick Quiz
Practice mcqs on Electronics
Let's start
pick difficulty level
all
1
2
3
4
5
736
Mcqs
1
attempts
1
followers
Related Topics
Digital Electronics
Analog Electronics
Basic Electronics
Electronics and Communication Engineering
Power Electronics
Digital Computer Electronics
Electronics
Suggested Books
Javascript is disabled
we serve best when javscript is enabled
Enable