In pulse width modulation of chopper


A Foxoyo User A Foxoyo User
  • Level 0
  • 0
    Attempts
  • 109
    users
  • 0 %
    Accuracy

  • share

Guaranteed answer

Just add "foxoyo"

next time you Google a mcq Questions

I want answer on Click

Related MCQs

In a step down chopper using pulse width modulation, Ton = 3 x 10-3 and Toff = 1 x 10-3 s. The chopping frequency is
In pulse width modulation of chopper
In amplitude modulation the rms value of radio frequency voltage after 40% modulation is 60 mV. If modulation is 80% the rms value after modulation will be about
Assertion (A): If a carrier is modulated by three sine waves and m1, m2, m3 are the modulation indices, the total modulation index mt is mt = (m12 + m22 + m32)0.5Reason (R): An AM, higher the level of
In the given circuit, what must the pulse width and time between pulses be to allow the capacitor to completely charge by the end of each pulse and to completely discharge between each pulse
A retriggerable one-shot has a pulse width of 10 ms; 3 ms after being triggered, another trigger pulse is applied. The resulting output pulse will be _________ ms
A retriggerable one-shot has a pulse width of 10 ms; 3 ms after being triggered, another trigger pulse is applied. The resulting output pulse will be ________ mS
A separately excited dc motor is run from a dc source through a chopper. At 600 rpm and rated torque, the duty cycle of chopper is 0.8. At 600 rpm and half the rated torque, the duty cycle is likely t

No Public Explanation

Click option to see answer

Post your public answer

Every MCQ Answered

1. Add foxoyo.com with question

2. Click option and get answer

46 active users

Related Topics